The Benefits of a Central AC Unit

Central air conditioning makes use of ductwork to deliver cool air to each room. A air handler equipped with a filter that captures particulates regulates the airflow.

The unit is usually housed in a small enclosure located outside the home. The unit’s quiet operation can enhance your comfort as it will stop the constant hum and whirrr of window AC units from disrupting indoor peace.

Energy Efficiency

Although it is true that central air conditioners consume more energy to run than wall-mounted units but the truth is that today’s systems are more efficient than the ones used in the past. The Ozone-depleting R22 refrigerant was removed by 2006 and replaced with 410A. Manufacturers are constantly developing new technologies to aid in the use of less energy.

Unlike window AC units specifically designed to cool only the area they’re installed in, central AC systems can distribute cool air throughout your home by using air ducts. The cooling process starts when your thermostat signals the air handler to begin cycling on. The air handler pulls warm air from your living areas and then passes it over the evaporator coil, which is filled with cool refrigerant. The heat that is released into the air causes refrigerant to absorb energy, and then transform into a gas. The compressor then raises the temperature and pressure of the refrigerant. As it pumps, the heat is pushed off the evaporator back into your home, where it will be distributed and cooled through the ductwork.

Central AC systems are most efficient when it comes to controlling the temperature in large areas. They are able to consistently cool rooms that are farther from one another than a single wall AC unit can and provide greater energy efficiency in general.

It could be that, based on how well sealed and insulated your home is, as well as the layout, a mini-split conditioner can save you more energy than central air cooling. Mini-splits differ from central ACs, however they can be more efficient, as they don’t require the ductwork. Ductwork leaks and could cause the system to overwork to cool your home to the desired temperature. If you’re interested to learn more about energy-efficient options for cooling your home, talk with an HVAC specialist at your local Dallas heating and air conditioning company. They can help you find the right solution for your requirements.

Convenience

In addition to comfort and energy efficiency, central air conditioning systems provide lots of convenience. They can cool a whole home or office in just one unit, and do not require ducts like window units do. They are also usually equipped with top-quality air filters that can help keep allergens and pollutants out of the air. This is especially helpful for those suffering from allergies or respiratory conditions.

Central AC is one of the most well-known types of cooling systems, and with good reason. This is an excellent option for homes with ductwork that require an effective cooling solution. These systems can cool each room by a single vent. They can also be used with home zoned thermostats, which allow you to control the cooling needs of different areas within your house.

This is the most popular AC system. It operates similarly similar to a furnace. A central air conditioner has an outdoor unit that blasts out warm air, and a smaller indoor air handler that pulls in hot or cold air through the ductwork. The refrigerant is circulated through the lines from the air handler and absorbs heat in the process. The cool air is pumped back into the air handler, and then circulated to other rooms through the ductwork.

An added benefit of a central air conditioning system is that it may help to reduce humidity. This is particularly important in our humid climate. The air handler can eliminate excess moisture, and then release it to the outside, which helps to prevent the growth of mold and mildew in your ductwork.

It’s time to replace your cooling system if it is older than 15 years. A new, top-quality AC system will save you money on energy costs and also help ensure the integrity of the ductwork of your home. To learn more about Chancey & Reynolds’ cooling solutions, contact us. We can help you choose the best air conditioner to meet your budget and needs.

Maintenance

Like any major appliance, your air conditioner needs regular maintenance to ensure it runs smoothly. Certain routine maintenance tasks can be completed by the homeowner while others are best left to certified experts. Signing up for a maintenance contract is the best method to keep on the forefront of AC problems. These agreements typically include discounts on repairs and other perks, such as priority scheduling.

Clean the Condenser Unit

A condenser unit that is dirty will limit air flow, reduce the efficiency of the system and increase energy costs. To avoid the build-up of dirt and other debris switch off the power supply to your compressor unit before you begin cleaning. Then using a garden hose, gently wash the fan blades and coil fins to remove dirt leaves, twigs and other debris. After washing then, use a towel and spray for sanitation to clean and disinfect the fan blades. It’s also an excellent idea to straighten out any noticeable bent fins, which may be caused by wind or other weather conditions.

Line Sets

If your central air conditioner has been in use for more than 10 years, you should hire a professional to inspect the line sets. These are the copper tubes that connect the indoor evaporator coil with the outdoor compressor and condenser. The lines are filled with refrigerant. any cracks or corrosion can result in leaks, which can result in inadequate cooling and higher utility bills.

Air Filter

To increase the efficiency of your AC system, you should change your air filter on a regular basis. The frequency of changing your air filter will depend on how often you use the AC, how many pets reside in the home and the amount of dust is collected. A standard air filter should last between two weeks and a month in the cooling season.

Condensate Drain Line

If the condensation drain line is blocked by mold, algae or snails, it can’t flush away the water that is collected by your evaporator coil during cooling. This can result in flooding in your basement, water damage in your home, and even mold and mildew growth. The float switch on your indoor coil will shut down the system when it detects a blockage in the drain line.